Pay attention to the problems in the construction of aluminum composite panel

The aluminum composite panel manufacturer reminds us that we must pay attention to the problems in the process of using aluminum composite panel, such as the closure treatment is not firm, not smooth, not sealed, or surface contamination, dent phenomenon, etc..

 

 

 

The Geomembrane For Fish Pond Liner manufacturer reminds us that 

we must pay attention to the problems in the process of using aluminum composite panel, 

such as the closure treatment is not firm, not smooth, not sealed, or surface contamination, dent phenomenon, etc..

 

 

 

 

In the phenomenon of surface contamination, dents, the main reason is the removal of protective film too early, 

improper measures to protect the finished product, 

the next process of construction on the finished product protection is not appropriate, 

impact on the surface of the board and other reasons, 

which requires us not to remove the protective film too early in the work to

develop feasible measures to protect the finished product, 

the emergence of pollution to clean up in a timely manner, scrub clean. If there is a problem with the seam treatment, 

it is generally because the construction is not done according to the requirements, 

resulting in the installation is not meticulous, improper installation, which requires a good seam plan before construction, 

the use of different structures and conditions of a reasonable seam plan, but in the installation of strict operation.

 

 

 

 

When there is a problem of poor sealing and unevenness of the seam, 

the reason is mainly because the inlay seam is not plugged with polyethylene foam, 

so that the bonding with the board seam is not firm and sealed, 

or it may be because of the unskilled operation of the workers.