Key Questions to Ask When Ordering What Are Adhesive Bandages Used For

None of our BAND-AID® Brand adhesive bandages have been tested or designed for protection against viruses such as COVID-19, but it's still important to keep your injury covered. If your bandage comes off earlier due to frequent hand washing, we recommend putting on a new one until the injury is healed.

For more information, please visit SCICO CARE.

Back to top

No. BAND-AID® Brand Antiseptic Washes & Sprays has not been tested or formulated to prevent against COVID-19 or any other virus, and neither have NEOSPORIN® antiseptic sprays.

They are also not recommended nor would they be beneficial for use as a hand sanitizer or a surface disinfectant. The Centers for Disease Control and Prevention (CDC) recommends the use of a hand sanitizer that contains at least 60% alcohol for protection against viruses. Our antiseptic spray and wash products are formulated to help clean your wounds and protect them against infection from bacteria, not viruses. 

Back to top

The majority of our products and packaging are not made with natural rubber latex.

These products are some of our exclusions, but always be sure to check your labels:

• BAND-AID® Brand HURT-FREE® Wrap

• BAND-AID® Brand Tough Wrap

• COACH® Sports Tape & Self Adhering Wraps

Back to top

BAND-AID® Brand HYDRO SEAL® bandages provide an optimal healing environment. Here are four quick steps to properly use them:

1. Stop any bleeding and clean your wound with an antiseptic wash and dry it completely.

2. To ensure the bandage sticks properly, don't apply any creams, ointments, or lotions to the wound. That's right, no antibiotic ointments necessary!

3. Carefully remove the white paper tabs and apply the bandage directly to the wound.

4. Within 24 hours of application, the product will begin to swell and a white bubble will appear over the wound. This signals your body's natural healing process has begun.

We highly recommend no peeking! HYDRO SEAL® products are designed to deliver multi-day protection, so you can wear it until it begins to detach.

Back to top

Most BAND-AID® Brand bandages and first aid products do not contain expiration dates, but we always recommend you double check your packaging.

You can find expiration dates on our products that contain active ingredients. Some of these include:

1. BAND-AID® Brand Infection Defense Line

2. Johnson & Johnson First Aid Kits

3. BAND-AID® Brand Antiseptic Wash

Back to top

No two bodies or wounds are the same, so cut healing times vary. However, deeper cuts do typically take longer to heal. Remember, too, wounds that are allowed to scab take longer to heal since healthy cells have a difficult time closing the gap around the dried, crusty cells of a scab.

To help heal wounds fast, keep your wound moist and covered with your favorite BAND-AID® Brand bandage! 

Back to top

It's not always possible to prevent an injury that could cause scarring. However, you can reduce the risk of your wound turning into a scar.

• 'See a healthcare provider '' some wounds may need stitching or special bandages, to hold the skin together until it can properly heal3

• 'Keep the wound clean ' 'as instructed above, wash around the area of the wound with soap and water3 or use an antiseptic wash to clean the wound

• 'Keep it moist '' using NEOSPORIN® antibiotic ointment can help prevent the wound from becoming too dry and developing a scab3

• 'Protect the wound '' using BAND-AID® Brand Adhesive Bandages - the number-one doctor-recommended first aid brand helps protect wounds while they heal and stop them from drying out

Find out more about how to prevent scars here.

Back to top

A cut that is not clean has a greater chance of getting infected. Cleaning your cut is important to the healing process as it helps remove the dirt and germs that could cause infection. We recommend BAND-AID® Brand Antiseptic Wash*, which helps to kill germs and can help temporarily relieve the pain and discomfort of your cut or scrape.

Back to top

Applying a thin layer of an antibiotic ointment such as NEOSPORIN® will help keep the cut moist and help prevent scarring1. Apply an amount equal to the tip of a finger, 1 to 3 times daily.

Want to know more about the #1 doctor recommended brand of topical antibiotic in the U.S.? Head to neosporin.com to learn more.

Back to top

Changing your bandage for a fresh one after cleaning a wound is essential for the healing process. If you're especially active or are carrying out activities such as gardening, change your bandage daily, when it gets wet, or more often as needed ' being sure to use clean hands.

Read our follow up care page to learn more about how to care for a wound as it heals.

Back to top

You should remove your BAND-AID® Brand adhesive bandage at least once daily to cleanse your wound2. When you've finished, you can put on a fresh bandage2.

With more complicated wounds, your healthcare provider may advise you to wash the wound out two to three times a day to help avoid infection1.

Find out more about cleaning wounds by reading about Follow Up Care.

Back to top

You should keep your wound covered until it is fully healed. Uncovering it before runs the risk of scabbing and re-injury, both of which may delay healing and increase scarring. If you have concerns about infection or a slow healing wound, speak to your doctor.

Get details on how and why to cover your cuts.

Understanding Bandaging

Back to top

Keeping your bandage fresh and clean is an important part of the healing process. You should change your bandage daily especially if it gets dirty, wet, or compromised in any way. Be sure your hands are clean before changing a bandage, too. If you already have a scab, still cover it up. This will reduce the chances of re-injury from tearing or scratching at the scab. Explore our collection of BAND-AID® Brand bandages to see which product best fits your needs.

Get details on how and why to cover your cuts.

Understanding Bandaging

Back to top

You should keep your wound covered with fresh bandages until it has fully healed. Keeping the wound protected with BAND-AID® Brand Adhesive Bandages and treated with NEOSPORIN® reduces the risk of scabs and scarring3.

You should talk to a doctor if symptoms get worse, or there is no improvement within 30 days2. Find out more about covering wounds as they heal.

Back to top

Scabs are simply your body's way of protecting a wound from germs while new skin is growing underneath. So, if minor cuts and scrapes form a scab, it's best to let it heal on its own. Usually, they heal in a few days.

Try not to scratch and pick at your scab, as that can make the healing process take longer. If you keep the affected area moist with NEOSPORIN® + Pain, Itch, Scar, this  may help reduce the urge to scratch.

The company is the world’s best What Are Adhesive Bandages Used For supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Learn all about how to heal scabs fast.

Back to top

Keeping a wound moist with NEOSPORIN® antibiotic ointment, and covered with a fresh BAND-AID® Brand adhesive bandage or gauze daily, can help minor wounds heal.

To learn how to heal wounds fast in more detail, check out our article.

Back to top

If you notice any of the following near the wound, it could be a sign of infection.

• Redness5

• Increasing pain5

• Bleeding5

• Thick, tan, green or yellow drainage5

• Warmth1

• Swelling5

• Fever ' a temperature of 100 °F or higher5

Read our advice to find out more about how to tell if a wound is healing or infected.

Back to top

If you think your wound has become infected, you should seek help from a healthcare professional as soon as possible.

Check out more advice on how to prevent and treat infections.

Back to top

You should seek help from a doctor or other healthcare professional if:

• You think a wound is infected (check our list of symptoms above)

• The wound is not healing properly or taking too long (more than 30 days2)

• The wound looks darker, dried out or deeper5.

If you need to seek help quickly in an emergency, call your local emergency number (or 911) if:

• You feel the condition is life-threatening (for example, a severe allergic reaction)

• Your condition could become life-threatening while you travel to the hospital

• You need a paramedic

• Traffic conditions or long distances could cause a delay getting to hospital.

Back to top

Dressings vary greatly in nature and size, so it is important to select the correct dressing for use on a specific wound. A sterile dressing which is past its expiry date should NOT be used.

A bandage is used in combination with a dressing where a wound is present. A roller bandage is used to secure a dressing in place. A triangular bandage is used as an arm sling or as a pad to control bleeding. It may also be used to support or immobilise an injury to a bone or joint or as improvised padding over a painful injury. A tubular gauze bandage is used to retain a dressing on a finger or toe.

Dressings

Sterile wound dressings

Wound dressings will be in a sterile packet, which should be opened carefully by a person with clean or gloved hands. Then, to avoid contamination of the sterile dressing, it is not removed from the opened packet until the wound is ready to be covered.

Dressings used to control bleeding must be bulky to ensure that adequate pressure is applied over the injured area. The most common dressing is made of combined wool or cellulose, covered in a light cotton woven fabric, and these are generally known as 'combine dressings'.

Some major wound dressings are labelled as BPC or BP (because they are listed in the British Pharmacopoeia) and consist of a sterile combine dressing with attached bandage. They are ideal  to fill crater wounds or to control severe bleeding.

Sterile gauze squares are used mainly for cleaning a wound. Cotton wool should NOT be used because of loose cotton fibres that might stick to the wound during healing.

Sterile non-adherent dressings

Very light dressings are used on a minor wound to aid healing and most have a non-adherent surface. A non-adherent dressing is often covered on one or both sides with a plastic film containing many perforations. If only one side has a plastic film, that is the side to be placed against the wound. This allows fluids to pass through into an absorbent layer, to keep the wound dry.

Other types of non-adherent dressing have a special synthetic coating on one or both sides to prevent adhesion to the wound surface. The non-adherent layer is always placed against the wound. To reduce confusion and incorrect use, some manufacturers make both sides onadherent.

Non-adherent dressings are used for extensive surface wounds such as an abrasion (graze) or burn.

Improvised dressings

In an emergency a dressing may be improvised from a range of materials. To control bleeding a bulky pad may be made from a bundle of several facial tissues or from any clean, non-fluffy material.

For a minor burn or scald, a piece of clean plastic kitchen wrap may be used initially. However, if the burn is serious, it is vital to use only sterile coverings to avoid the risk of infection. Cooling should be continued until a sterile dressing is available.

Bandages

Roller bandages

Roller bandages vary greatly depending on how they are to be used.

A roller bandage is used to:
' hold a dressing in place on a wound
' maintain pressure over a bulky pad to control bleeding
' support an injured limb or joint
' apply pressure to a limb

Roller bandages are made from lightweight cotton, crepe or elasticised crepe, depending on the pressure to be achieved. A lightweight cotton bandage is used to hold a dressing in place, whereas a crepe or elasticised crepe bandage is used for applying support or firm pressure to a soft tissue injury.

Applying roller bandages

A roller bandage needs to be chosen carefully to ensure that it is the correct width for the body part involved. As a general guide, the following widths are recommended:
' Lower arm, elbow, hand and foot ' 75 mm.
' Upper arm, knee and lower leg ' 100 mm.
' Large leg or trunk ' 150 mm.
It is best to use a bandage with some degree of stretch in the weave. This will make the bandage easy to use and more likely to stay in place for many hours. However, the correct application technique is essential to provide comfort and adequate support for the affected part.

Basic steps to successful use of a roller bandage:

• Bandage the part in the position of greatest comfort to the patient. Support the part adequately before starting to apply the bandage.
• Hold the tightly rolled bandage with the 'head' of the bandage on top and wrap the 'tail' around the body part without unrolling more than a few centimetres at a time.
• Begin with a locking turn to hold the start of the bandage securely under each following turn.
• Work from the middle of the body or limb in an outwards direction.
• Work from the narrowest part below the dressing and work upwards.
• Ensure that each turn covers two-thirds of the previous turn.
• Cover totally any dressing and padding used.
• Finish with a straight turn at the end of the bandage.
• Secure the bandage with a safety pin or adhesive tape. Avoid the use of metal clips because they are less secure and can fall out during activity.

Applying a roller bandage to the lower arm or leg:

• Apply a dressing or padding over the affected area.
• Start with a diagonal, locking turn below the dressing or padding to secure the dressing.
• Continue up the limb, covering two-thirds of each previous turn.
• Finish with a straight turn to secure the bandage and fasten it with a pin or adhesive tape.

Applying a roller bandage to the elbow or knee:

• Apply a dressing or padding over the affected area.
• Start with a full turn over the point of the elbow or knee to secure the bandage.
• Make a second turn just below the first, exposing one-third of the initial turn over the point of the elbow or knee.
• Make a third turn just above the first, again exposing one-third of the initial turn over the point of the elbow or knee.
• Continue with one or two more turns alternately working from below to above the affected joint, until the dressing or padding is fully covered.
• Avoid any extra turns that will cause pressure on the inside surface of the joint.
• Finish with a full turn above the elbow or knee and secure the bandage with a safety pin or adhesive tape.

Applying a roller bandage to the hand or foot:

• Apply a dressing or padding over the affected area.
• Start with a diagonal, locking turn around the wrist or foot.
• Carry the bandage across the back of the hand or foot to the base of the little finger or little toe and then make a complete turn around the fingers or toes.
• Make another turn across the back of the hand or foot from the fingers/toes to the wrist/ankle.
• Repeat these turns working upwards with each turn until the dressing or padding is covered.
• Finish with a circular turn around the wrist ankle and secure the bandage with a safety pin or adhesive tape.

Triangular bandages

Triangular bandages are usually made from a metre square of cotton or calico that is cut in half diagonally. The bandage can be used in various ways as a sling or for immobilisation of broken bones and soft tissue injuries.

Sling

• In the open form as a sling to support an upper body injury.

Broad-fold bandage

• As a broad-fold bandage with the apex folded down to the base twice to immobilise a lower body injury.

Narrow-fold bandage

• As a narrow-fold bandage with the broadfold bandage folded in half to control severe bleeding, or for immobilisation of a lower limb.
• As a collar-and-cuff sling for an upper body injury.

Pad

• As a folded pad after the ends of the narrowfold bandage have been brought into the centre three times, and for use on a major wound or as padding.

Tying a reef knot with a triangular bandage
When using a triangular bandage it is important to use a reef knot to secure it in place. A reef knot is a flat knot that will not slip undone and, if correctly placed on the body, is comfortable for the patient.

1. Wrap the left end of the bandage over and then under the right end to start the knot.
2. Wrap the right end over and then under the left end to complete the knot.
3. Pull the knot tightly from both sides to ensure that it will lie flat.

It is easy to untie a reef knot without jarring or hurting the patient. Simply choose two paired ends as they come out of the knot at one side. Then pull the ends apart steadily until two loops form and can be slipped off one end.

Arm sling
This sling is used to support a lower arm or hand
injury and for rib or collarbone fractures.

• Encourage the patient to hold the affected arm across the body in the position of greatest comfort.
• First hold the bandage with the base running down the centre of the body and the point to the elbow on the affected side. Gently slip the top point under the supported arm and wrap it around the back of the neck until it rests on the shoulder of the affected side.
• Lift up the lower point and take it to meet the upper point at the side of the neck on the affected side.
• Use a reef knot (see above) to tie the ends together just above the collarbone to avoid any pressure on the back of the neck.
• Adjust the sling so that the fingertips are clearly visible and then bring the point forward and fasten it to the sling with a safety pin.
• Finally, check the circulation in the fingers and compare the tissue colour with the fingertips on the unaffected arm. If there are any signs of an impaired circulation, loosen or remove the sling and any underlying bandages.

Elevation sling
This sling is used for an arm or finger injury where the patient needs the hand and arm to be held in an elevated position.

• Encourage the patient to hold the affected arm across the body with the fingers pointing to the opposite shoulder tip.
• First hold the bandage with the base running down the centre of the body and the point to the elbow on the affected side. Gently place the bandage over the supported arm and carry the top end around the front of the neck until it rests on the unaffected shoulder.
• Gently wrap the lower half of the bandage along the affected arm. Carry the free end of the bandage from the elbow across the back to the opposite shoulder tip.
• Gently twist the top point around the fingers, but avoid placing pressure on any injury. Tie the two ends together with a reef knot (see above) and place it just above the collarbone to avoid any neck pressure.
• At the point of the elbow smooth the loose fabric forwards along the arm under the sling. Secure the sling firmly at the elbow with a safety pin or tape.

Collar-and-cuff sling
This sling is used to hold the lower arm and hand in an elevated position where a full elevation sling is either not required, or for patient comfort in very hot weather. The sling is made with a narrowfold bandage used as a clove hitch.

• Make a clove hitch with two large loops of the bandage. One loop is made with the bandage end pointing upwards and the other end pointing downwards.
• Fold the two loops inwards towards the middle, ensuring that both ends are trapped between the loops.
• Encourage the patient to hold the affected arm across the body with the fingers pointing to the opposite shoulder tip. Then gently slide the two loops over the hand and lower arm with the ends hanging downwards.
• Carry the two bandage ends up on either side of the limb and around the patient's neck.Adjust the bandage so that it is possible to tie a
  reef knot (see above) just above the collarbone on one side to avoid any pressure on the neck.
• The knot may be placed on either side of the neck depending on the location of the injury and the comfort of the patient.

Have the information on hand when you need it the most.
Buy the First Aid Handbook >>

For more Comprehensive Bandageinformation, please contact us. We will provide professional answers.